Electric Aroma Diffuser

Up to 8 hours misting per full tank.

Off white mock ceramic (made from resin) diffuser.

Warm white glow - Can be used with or without light.

3 mist settings with light on or off.

80ml water tank capacity.

USB connection for use with any USB plug.

1. Remove the cover and remove the water tank lid from the machine bottom.
2. Plug the cable into the back of the base unit.
3. Pour cold tap water into the water tank up to the max water level line.
4. Add three - six drops of our aroma diffuser fragrance oil into the water tank.
5. Replace the water tank lid onto the base. Replace the cover by pushing firmly down.
6. Plug the USB into any USB plug/port.
7. Turn on and choose one of the below settings:

• 1st push - Continuous mist with warm white light on.
• 2nd push - Intermittent mist with warm white light on.
• 3rd push - Intermittent mist with warm white light off.
• 4th push - turn off the diffuser.

Note - The unit will automatically stop misting when the water level has become to low.

• Only use the USB cable included in the unit.
• Always unplug the USB cable before cleaning.
• Fragrance oil should not come in contact with the exterior surface of the unit.
• Do not submerge the unit into water to avoid risk of electric shock.
• Do not put fingers, hands, or any object into the unit while operating.
• Do not attempt to adjust or repair the unit.
• Do not place the unit near heat sources or direct sunlight. Use this unit only as directed.
• When pouring water, please remove the cover, remove the water tank lid, and pour the water out from the other side of the air outlet.
• Dry with a soft cloth to avoid mineral buildup. Do not use strong cleaning agents.
• To remove possible buildup, gently use a cotton swab dipped in white vinegar to wipe out the inside.